Start here if you're not sure what's wrong
Something's off with your speaker. Let's find out what.
"Fix my speaker" covers a lot of different problems, and they don't all have the same fix. Pick the one that matches what you're actually hearing.
It got wet
Water sitting in the mesh grille is the single most common cause of a muffled or silent speaker after a spill, rain, a toilet drop, or a swim. A 165 Hz sound cycle — the same one Apple Watch uses for its Water Eject shortcut — vibrates it back out.
It sounds quiet or tinny, no water involved
Pocket lint and fine dust build up over months and muffle the high end first — that's the "tinny" sound. A faster, higher-frequency sweep clears this better than the low water-ejection tone does.
No sound at all, from any speaker
Check the basics first: silent/Do Not Disturb mode, a Bluetooth device still connected in the background, or a case blocking every speaker port at once. If none of those explain it, run the speaker test to confirm exactly which channel is affected before assuming the worst — a driver that's silent on one side only points somewhere different than one that's silent everywhere. If truly nothing plays after a full volume-up, the driver itself has likely failed — a sound cycle can't restart a speaker that isn't receiving or reproducing audio at all. That needs a hardware repair, not a tone.
When to stop trying sound cycles
If you've run two or three cycles and there's been zero change — not "a little better," but nothing — the problem almost certainly isn't blockage. Persistent grinding, a burning smell, or a phone that was submerged for more than a few minutes are all signs to see a technician rather than keep trying.
Fix my speaker — common questions
How do I fix my phone speaker?
First figure out which symptom matches: water exposure, dust/low volume, muffled calls, others can't hear you, or total silence. Each has a different fix — water and dust respond to a sound cycle, but total silence or persistent distortion after cleaning usually points to hardware damage.
How do I fix my speaker volume being too low?
Low volume that came on suddenly, especially after water or dust exposure, is usually a blocked grille — run Dust Buster or Water Ejector depending on the cause. Low volume that's been gradual over months with no exposure is more likely a hardware or software issue unrelated to blockage.
Why is my speaker fix not working?
Sound-based cleaning fixes blockage — water or debris in the grille. It can't fix a burned-out coil, a torn diaphragm, or liquid damage that reached the logic board. If two or three cycles haven't helped at all, the cause probably isn't something a tone can reach.
Is it safe to try to fix my own phone speaker with sound?
Yes — a calibrated tone through your own speaker carries no more risk than playing music, as long as volume and duration stay reasonable, which this tool handles automatically. It's safer than opening the phone or using anything sharp on the grille.