· 7 min read · By the Clean My Speaker team
Water eject for iPhone and Android: free sound, no app needed
Short answer
Water eject plays a low, pulsed tone (around 165 Hz) that makes your speaker cone move far enough to push small water droplets out of the grille. iPhone has no built-in version (Apple Watch has Water Lock), and most Android phones don't either, but you can run it free in your browser: hold the speaker face-down on a cloth, turn the volume up and start the 45-second cycle below. It can't dry the inside of a phone or fix a wet charging port.
Hold the speaker face-down on a cloth. The tone pulses at 165 Hz to push trapped droplets out.
No install, no account, nothing uploaded. If your phone was submerged, or shows a liquid-detection warning, read what to do first before playing any tones.
Pick your phone
| Phone | Built-in water eject? | What to use |
|---|---|---|
| iPhone | No (Apple Watch only) | This page in Safari, or the community shortcut |
| Samsung Galaxy | No dedicated button | This page in Samsung Internet or Chrome |
| Google Pixel | No | This page in Chrome |
| Xiaomi, Redmi, POCO | On many models (varies) | Built-in Clear speaker if you have it, otherwise this page |
| Other Android | Generally no | This page in Chrome |
How water eject works
A phone speaker is a small cone that moves back and forth. A slow, pulsed tone around 165 Hz makes it travel further than ordinary music does, and that extra movement can overcome the surface tension holding a droplet against the mesh and push it out. That is the whole mechanism: there is no magic frequency, and a web page can do what an app can. The longer explanation, including why 10,000 Hz doesn't work, is in what water eject sound is.
What it can't do: dry the inside of a phone, clear a wet charging port, or repair a damaged speaker. If sound is still muffled after two or three cycles, run the speaker test and look at the causes in why a phone speaker sounds muffled.
Water eject on iPhone
There is no water eject button on iPhone. The feature people are thinking of is Water Lock on Apple Watch, which plays tones to clear that watch's speaker when you turn it off. For iPhone, you have three options:
- This page, in Safari. Nothing to install, and it works when your phone is already wet.
- Add it to your Home Screen for one-tap access: in Safari tap Share, then Add to Home Screen, then Add.
- A community Siri Shortcut, covered below.
iPhone tips: take the case off, turn media volume all the way up, and hold the bottom edge (where the speaker is) facing down over a cloth. If you hear nothing, check the Ring/Silent switch on the side. On some iPhones it can mute sound played by websites, so flip it until no orange shows. If the alert "Liquid detected" appears when you plug in, that's about the charging port, not the speaker; see the liquid-detected guide. For an iPhone-tuned version of this tool, use the iPhone speaker cleaner.
iPhone water eject shortcut
The "Water Eject" shortcut that circulates online is a community-made Siri Shortcut that plays a low tone through the speaker. Its advantage is speed once it's installed: trigger it by saying "Hey Siri, Water Eject", with Back Tap (Settings → Accessibility → Touch), or with the Action Button on iPhone 15 Pro and later. Its drawbacks are that you have to install it before your phone gets wet, and that a shortcut can do more than play sound, so only add one you trust and check what it asks for. Setup steps and a comparison with the browser tool are in the iPhone Water Eject shortcut guide.
Water eject on Android
Android is more fragmented than iPhone: whether you get a built-in option depends on the manufacturer and software version. On any Android phone, the browser method works the same way:
- Remove the case and wipe the phone dry.
- Turn media volume to maximum (press a volume key and check it's media, not ringtone).
- Disconnect Bluetooth so sound plays through the phone speaker.
- Open this page in Chrome, start the 45-second cycle and hold the speaker face-down over a cloth.
- Play some audio. Repeat once or twice if it's still muffled.
In Chrome, tap ⋮ then Add to Home screen for a one-tap icon. Many Android phones use the earpiece as a second stereo speaker, so if one side sounds weaker, also run the call speaker cleaner. More in water eject on Android.
Water eject on Samsung Galaxy
Samsung Galaxy phones have no dedicated speaker water-eject button. Use this page in Samsung Internet or Chrome; in Samsung Internet you can tap the menu, then Add page to → Home screen for a shortcut icon.
Don't confuse this with Samsung's moisture detected warning. That water-drop icon is about the USB-C port and pauses cable charging; the bottom speaker sits right next to it, so a phone that tripped the warning often has a wet speaker grille too. Handle the port as Samsung advises (dry it, no hair dryer or oven, wireless charging if your model has it), and use the water eject cycle for the speaker.
Water eject on Google Pixel
Pixel phones have no built-in water eject option. Open this page in Chrome, start the cycle, and add it to your Home screen if you want a one-tap icon. Many Pixel models use the earpiece as a second stereo speaker, so if the sound is lopsided after getting wet, run the call speaker cleaner too and confirm with the left/right speaker test.
Water eject on Xiaomi, Redmi and POCO
Many Xiaomi, Redmi and POCO phones have a built-in Clear speaker option, usually under Settings → Additional settings → Clear speaker. Guides describe it as playing a roughly 30-second clip that you can repeat, and suggest searching "Clear" in Settings if you can't find it. Treat that path as a guide, not a promise: Xiaomi users report the option is missing on some models and has disappeared after some updates, and we couldn't find an official Xiaomi page describing it for the current software.
The built-in clip is described as aimed at dust. If your speaker is muffled after getting wet, the pulsed 165 Hz water cycle on this page is the better match, and the two don't conflict: run the built-in option if you have it, then this one.
If it doesn't work
- Run two or three cycles with a few minutes between them, speaker still face-down.
- Still quiet or muffled? It may be dust, not water. Try the Dust Buster mode on the main speaker cleaner and clean the grille gently by hand: see cleaning dust and lint out of a speaker.
- Crackling or buzzing? That points elsewhere: phone speaker crackling.
- Phone was submerged, or won't charge? Power it off and follow the first-ten-minutes guide. Don't put it in rice: see what Apple actually says.
Frequently asked questions
Does iPhone have a built-in water eject?
No. Apple Watch has Water Lock, which plays tones to clear its speaker, but iPhone has no equivalent. On iPhone you can use a browser-based water eject like this page, a community Siri Shortcut, or an app.
Does Android have a water eject feature?
Most Android phones, including Samsung Galaxy and Google Pixel, have no dedicated water eject button. Many Xiaomi, Redmi and POCO phones have a Clear speaker option in settings, though it varies by model and software version. A browser-based water eject works on any Android phone.
How long should I run water eject?
One cycle here is 45 seconds. Run it once, check the sound, and repeat up to two or three times with short breaks. If the speaker is still muffled afterwards, the problem may not be water.
Is the water eject sound safe for my speaker?
Yes, in short cycles. The tone is within a phone speaker's normal operating range. Stop if the sound crackles or distorts, and keep the phone away from your ear while it plays.
Does water eject work if my phone is waterlogged?
No. Sound can help move small droplets out of the speaker grille. It can't dry the inside of a phone or fix a wet charging port. If your phone was submerged, power it off and have it checked.
Why can't I hear anything on my iPhone?
Check the Ring/Silent switch on the side. On some iPhones it can mute sound played by websites, so flip it so no orange shows, turn the media volume up, and try again. Also make sure Bluetooth isn't routing the sound to another device.
Sources
- Apple Support: How to use Water Lock and eject water from your Apple Watch
- Xiaomi Community: How to use the MIUI 11 Clear speaker feature (community post, not official documentation)
Last reviewed: November 12, 2026.